Dental technician checking a zirconia crown at a lab

How Long Does a Zirconia Crown Take to Make?

Contributed by Dan Rose, a Senior Local Business Guide Specializing in Dental Laboratory Services in New York City

You leave the dentist’s chair with a temporary crown and an appointment two weeks out, and it is fair to wonder what takes so long. The machine time for a zirconia crown is measured in hours, yet the wait is measured in days, and the difference is where most of the quality control happens.

Here is what happens to a zirconia crown between the day your tooth is prepared and the day it is cemented, and why some of those steps cannot be hurried.

The short answer

The hands-on and machine work for a single zirconia crown adds up to less than a working day. The calendar time is longer because the steps run in sequence, the longest one normally runs overnight, and the case has to travel to the lab and back. It also has to fit your dentist’s schedule at both ends.

A dentist who mills crowns in the office can deliver one the same day, using materials and furnaces made for that. A crown made by an outside dental laboratory usually comes back in one to two weeks, depending on the lab, the material, and how the case is sent.

Step one: the lab receives your tooth, as a scan or a mould

Many offices now use an intraoral scanner, a small wand that builds a 3D digital model of your teeth. The file can reach the lab the same afternoon. Offices that still take a traditional putty impression have to ship or courier it, and the lab pours it in stone to make a physical model. That alone can add a day or two.

Either way, a technician’s first job is to check the margin, the line where the crown will meet your tooth. If that line is not clearly captured, nothing downstream can fix it.

Step two: the crown is designed on screen

Using CAD software, a technician shapes the crown around your prepared tooth and against the teeth it will bite on. The software proposes a shape. The technician adjusts contacts with neighbouring teeth, the bite, and the thickness of the material, since zirconia has minimum thicknesses it must not go below.

Some dentists ask to approve the design before it is made. That is a good habit, but the case waits until the approval arrives.

Step three: the crown is milled deliberately too large

This is the step most people have never heard of, and it is the reason a zirconia crown fits at all.

Zirconia is milled while it is still soft and chalky, in what is called a pre-sintered state. When it is later fired, it becomes dense and hard, and it shrinks by roughly a fifth in every direction. A 2025 study from Ludwig Maximilian University in Munich measured linear shrinkage between about 18% and 21% across several multilayer zirconia materials.

To make up for that, the milling software enlarges the design by a precise ratio called the enlargement factor. Each zirconia blank is labelled with its own factor, because every batch shrinks slightly differently. Glidewell, the maker of BruxZir, measures and weighs every blank it produces to calculate that number to four decimal places.

What that number does, with real figures

Say a finished molar crown needs to measure 10.00 mm from front to back, and the blank is labelled with an enlargement factor of 1.2500. The mill cuts the soft crown at 12.50 mm (10.00 × 1.2500), and after firing it shrinks back to 10.00 mm.

Now suppose someone enters 1.2400 instead. The mill cuts at 12.40 mm. After firing with the blank’s real shrinkage, the crown comes out at 12.40 ÷ 1.2500 = 9.92 mm. That is 0.08 mm, or 80 microns, too small. A crown that far undersized will not seat properly on the tooth it was made for.

Milling the soft crown itself typically takes 30 to 45 minutes on a modern five-axis mill.

Step four: firing, usually overnight

The milled crown goes into a sintering furnace and is heated to around 1,500°C or higher. BruxZir’s instructions, for example, specify 1,580°C. A conventional cycle, including the slow heat-up and cool-down, commonly runs six to eight hours. Many labs load their furnaces at the end of the day so the cycle runs overnight.

Faster “speed sintering” cycles exist, some under an hour, but they are validated only for specific zirconia materials in specific furnaces. Run a speed cycle on a material that was not designed for it, and the crown can come out weaker, cloudier, or cracked.

Step five: colour, glaze and a final check

After firing, the technician stains the crown to match the shade your dentist sent, then glazes and fires it again. The finished crown is checked on the model for fit, contacts and bite before it is packed. Each glaze firing is short compared with sintering, but the crown has to heat and cool with every firing, so this stage is still measured in hours rather than minutes. It is also the stage where a skilled technician makes the most visible difference. The case then travels back to the office by courier or mail and waits for your appointment.

Why a front tooth often takes longer than a back tooth

A molar crown made from full-strength zirconia is usually one solid piece with its colour stained on the surface. It is the most predictable crown a lab makes, and often the fastest.

A front tooth is a different job. People notice a front crown that is a shade too bright or a little too opaque at the edge. To get it right, a lab may use a more translucent zirconia, or build porcelain by hand over a zirconia core. Each porcelain layer needs its own firing, and a technician may compare the crown against photographs several times before it is finished.

Some dentists ask for a try-in: the crown comes back unglazed, is checked in your mouth, and returns to the lab for final adjustments to colour or shape. That adds a visit and several days. For a single front tooth, it is often time well spent.

Bridges and implant crowns add their own steps

A bridge replaces a missing tooth by joining crowns across the gap, and the joints between them, called connectors, have minimum sizes the design must respect. A longer piece of zirconia also shrinks across a longer distance in the furnace, so small errors add up. Labs check bridges carefully on the model before they ship.

An implant crown sits on a metal post in the jawbone rather than on a natural tooth. The dentist scans a small marker, called a scan body, that tells the lab exactly where the implant sits and at what angle. The lab may also need to make a custom connecting piece, called an abutment, or order a manufacturer part. If a part has to come from the implant company, its delivery time becomes part of your wait.

Where the timeline goes wrong

The margin is not visible on the scan or mould

If gum tissue or fluid hid part of the edge when the scan was taken, the lab cannot design a crown that seals properly. It has to go back to the dentist, and sometimes you go back in for a new scan. This is the most common reason a case stops before it starts.

The shade information is thin

A shade tab number alone can leave a technician guessing, especially for a front tooth. Without a photo of the shade tab held next to your teeth, a crown can be made to specification and still look wrong in your mouth. That means a remake and another wait.

The wrong enlargement factor is entered

As the example above shows, a small typing error at the mill produces a crown that is the wrong size by a margin you cannot see but the tooth can feel. The fix is to mill it again, and that costs at least another firing cycle.

A speed cycle is used on the wrong material

The temptation to rush an urgent case by running a fast firing is understandable. On a disc that is not approved for it, the result may look fine and still fail months later.

The clock starts later than everyone assumed

Some labs count turnaround from when they receive the case, others from when the dentist approves the design. A “five-day” crown can become eight if the approval sat in an inbox over a weekend.

What to do while you wait

Your temporary crown is held with a deliberately weak cement so it can come off easily. Avoid very sticky or hard foods on that side, and slide floss out sideways rather than pulling it up through the contact. If the temporary comes off, keep it and call the office; most can re-cement it quickly. A tooth left without a temporary can shift slightly, and then the new crown may not fit.

If you want to understand why your dentist chose zirconia for your tooth rather than a porcelain-and-metal crown, it helps to read how zirconia and PFM crowns compare on strength, tooth reduction and appearance.

Frequently asked questions

Why does my crown take two weeks if the machine only takes an hour?

Milling is only one step. Design, overnight firing, staining and glazing, a final fit check, shipping both ways, and fitting into your dentist’s appointment schedule all add days.

Can I get a zirconia crown in one day?

Yes, if your dentist has an in-office milling unit and uses materials approved for fast firing. Those systems are designed for speed. Complex cases, bridges, and front teeth that need custom colour work usually still go to a lab.

Is a same-day crown as good as a lab-made one?

It can be, for a straightforward single back tooth. A lab has more material choices, longer firing cycles, and a technician whose full-time job is shape and colour. That matters more on visible teeth and larger cases.

What happens if my crown does not fit when it comes back?

Your dentist will usually rescan or take a new impression and send the case back. That restarts most of the process, which is why labs are careful to check fit on the model before shipping.

Does a zirconia crown shrink after it is in my mouth?

No. All of the shrinkage happens in the lab furnace, before the crown is finished. Once it is fired, zirconia is dimensionally stable.

This article is general information and is not dental advice. Ask your dentist about the timeline and material that are right for your treatment.

Talk to a dental lab that works with New York dentists

Dentists looking for a lab partner for zirconia, PFM and digital cases can contact Ultimate Dental Lab directly.

Ultimate Dental, Denture, Crown & Implants Lab
5 Pennsylvania Plaza #613, New York, NY 10001
(646) 916-1131

Dental technician checking a zirconia crown at a lab

Share Today

Fill the Form for Events, Advertisement or Business Listing